Tanda TX7120 Installation And Operation Manual

Intelligent addressable smoke & heat detector

Advertisement

Quick Links

TX7120
Intelligent Addressable Smoke & Heat Detector
Installation and Operation Manual
TANDA UK Technology Copyright ©2015, All right reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX7120 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tanda TX7120

  • Page 1 TX7120 Intelligent Addressable Smoke & Heat Detector Installation and Operation Manual TANDA UK Technology Copyright ©2015, All right reserved.
  • Page 2 TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual Product Safety To prevent severe injury and loss of life or property, read the instruction carefully before installing the detector to ensure proper and safe operation of the system. European Union directive...
  • Page 3: Table Of Contents

    TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual Table of Content 1 Introduction ................................4 1.1 Overview ................................. 4 1.2 Feature and Benefits ............................. 4 1.3 Technical Specification ..........................4 2 Installation ................................5 2.1 Installation Preparation ..........................5 2.2 Installation and Wiring ..........................
  • Page 4: Introduction

    1 Introduction 1.1 Overview The TX7120 Intelligent Addressable Optical Smoke & Heat Detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns and combining with heat sensing sensor for temperature response. The unit manufactured base on the sensitivity requirement of EN 54 part 29, European Standard.
  • Page 5: Installation

    The installation must be installed in compliance with all local codes having a jurisdiction in your area or BS 5839 Part 1 and EN54. The TX7120 Smoke & Heat detectors operate on the principle of infra-red light refracting off smoke particles entering the chambers. This makes detector more sensitive to smouldering fires such as modern fabric or furnishing.
  • Page 6: Detector Configuration

    TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual 3 Detector Configuration 3.1 Preparation The TX7930 handheld programmer is used to configure Smoke & Heat detectors soft address and parameter. This tools are not included, must be purchased separately. The programmer is packed with twin 1.5V AA battery and cable, ready for usage once received.
  • Page 7: Set: Led On/Off

    TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual 3.3 Set: LED On/Off 1. The LED can be turn-off if desire, the sensing ability of the detector will not disrupt even the LED is off. 2. Attach the programming cable to 1 and 6 Terminals of detector. Press “Power” to switch-on the unit.
  • Page 8: General Maintenance

    TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual 4 General Maintenance 1. Inform the suitable personnel before conducting the maintenance. 2. Disable the detector on the control panel to prevent false alarm. 3. Do not attempt to adjust or modify the detector, it may affect the ability of the detector to respond to a fire condition and will void the manufacturer’s warranty.
  • Page 9: Troubleshooting Guide

    TX7120 Intelligent Smoke & Heat Detector Installation & Operation Manual 5 Troubleshooting Guide What you notice What it means What to do The wiring is loose Conduct maintenance Address not enrolling The address is duplicate Re-Commission the detector Unable to commission...

Table of Contents