Related Manuals for Tanda TX7140
Summary of Contents for Tanda TX7140
- Page 1 TX7140 Intelligent Manual Call Point Installation and Operation Manual TANDA UK Technology Copyright ©2015, All right reserved.
- Page 2 TX7140 Intelligent Manual Call Point Installation &Operation Manual Product Safety To prevent severe injury and loss of life or property, read the instruction carefully before installing the manual call point to ensure proper and safe operation of the system. European Union directive...
-
Page 3: Table Of Contents
TX7140 Intelligent Manual Call Point Installation &Operation Manual Table of Content 1 Introduction ..............................4 1.1 Overview ..............................4 1.2 Feature and Benefits ........................... 4 1.3 Technical Specification ........................4 2 Installation ..............................5 2.1 Installation Preparation ........................5 2.2 Installation and Wiring ........................5 3 Manual Call Point Configuration ...................... -
Page 4: Introduction
1 Introduction 1.1 Overview The TX7140 Intelligent Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. -
Page 5: Installation
TX7140 Intelligent Manual Call Point Installation &Operation Manual 2 Installation 2.1 Installation Preparation This manual call point must be installed, commissioned and maintained by a qualified or factory trained service personnel. The installation must be installed in compliance with all local codes having a jurisdiction in your area or BS 5839 Part 1 and EN54. -
Page 6: Manual Call Point Configuration
TX7140 Intelligent Manual Call Point Installation &Operation Manual 3 Manual Call Point Configuration 3.1 Preparation The TX7930 handheld programmer is used to configure manual call point soft address. This tool is not included, must be purchased separately. The programmer is packed with twin 1.5V AA battery and cable, ready for usage once received. -
Page 7: General Maintenance
TX7140 Intelligent Manual Call Point Installation &Operation Manual Read Description Address: Unique number Address: 123 1. Read assigned ID: 123456789012 2. Write ID: Device serial number 3. R/W Config 4. Set Figure 8 Figure 7 4 General Maintenance 1. Inform the suitable personnel before conducting the maintenance. -
Page 8: Troubleshooting Guide
TX7140 Intelligent Manual Call Point Installation &Operation Manual 5 Troubleshooting Guide What you notice What it means What to do The wiring is loose Conduct maintenance Address not enrolling The address is duplicate Re-Commission the call point Unable to commission...
Need help?
Do you have a question about the TX7140 and is the answer not in the manual?
Questions and answers