Kidde P4010ACS-W User Manual page 14

note: If no further steps are taken within 15 minutes of initial power up, a voice prompt, "No devices found, not
connected" will be heard once, and the wireless function will turn off. The unit will then perform as a standard
hardwired alarm. See Section 9.3 for re-activating wireless.
c. pIck one deVIce
Press and hold the button on only ONE device until you hear two beeps.
Release button. You will hear "Searching for other devices".
•
The light will pulse and device will sound a continuous "Sonar" ping until
step E is complete.
d. relAx And WAIt
Wait until all devices have connected to network. Once connected, each
device will speak, "Success now connected!"
•
Once connected, the lights will glow green.
e. pIck one deVIce
Press and hold the button on only ONE device until you hear 2 beeps.
Release button. "Sonar" ping will stop.
•
Device will announce that setup is complete and the number of connect-
ed devices.
F. SetUp coMplete!
If all devices flash green and "Sonar" ping has stopped, the devices are now connected. Congratulations!
g. proceed to WIrIng InStrUctIonS In SectIon 10.
14
"Searching for
other devices."
Hold for DON'T press buttons
5 seconds on other devices
Figure 9.1-C
"Success, now
connected!"
Figure 9.1-D
Hold for
5 seconds
Figure 9.1-E