Automotive Data Solutions iDatastart Owner's Manual

Automotive Data Solutions iDatastart Owner's Manual

Hide thumbs Also See for iDatastart:

Advertisement

Quick Links

TR1110A
OWNER'S MANUAL
TERMS OF USE
INSTALLER TERMS OF USE
Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by Certified Technicians
who are employed by a registered business specialized in the installation of automotive aftermarket electronics
products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician's
responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in
Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential
damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of
economic opportunity and the like that may or may not have resulted from the use, misuse, improper
installation or operation of its products. Purchasers sole contractual remedy is refund of the purchase price of
the ADS product(s). ADS reserves itself the right to suspend any Weblink® account without notice and decline
to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
END USER TERMS OF USE
ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system
meets all safety regulations and operates as intended by the manufacturer, please follow the usage
recommendations below:
• DO NOT use this product for any purpose other than its intended usage.
• DO NOT remote start a vehicle in an indoor or enclosed area (i.e. garage). Exhaust fumes are extremely
dangerous and can cause personal injury or death. Install carbon monoxide detectors in every living area that
can be exposed to vehicle exhaust fumes.
• DO NOT remote start a vehicle while it is being serviced. Follow the Valet Mode procedure as outlined in your
Owner's Manual.
• DO NOT remote start a vehicle in gear.
• DO NOT remote start a vehicle with the key in the ignition.
• DO NOT remote start a vehicle left unattended with open windows, unlocked doors or open convertible top.
• DO NOT allow children handle or operate long range remotes.
• ALWAYS engage your emergency brake prior to exiting your vehicle. This may limit motion if the vehicle is
accidentally started in gear.
• AVOID remote starting your vehicle while passengers or pets are on board. This may increase the risk of
2022-01-27 © Automotive Data Solutions Inc. 1/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDatastart and is the answer not in the manual?

Questions and answers

Summary of Contents for Automotive Data Solutions iDatastart

  • Page 1 Technicians, non-compliant Certified Technicians or end users. END USER TERMS OF USE ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system meets all safety regulations and operates as intended by the manufacturer, please follow the usage recommendations below: •...
  • Page 2: Remote Overview

    ALWAYS ensure the Reservation Mode sequence, as outlined in your Owner’s Manual, is correctly engaged prior to the next remote start. • AVOID delaying the inspection of your iDatastart system in the event of malfunction. Immediately contact a Certified Technician to ensure that installation or defective equipment is properly addressed.
  • Page 3 TR1110A REMOTE COMMANDS & CONFIRMATIONS Your iDatastart remotes contain multiplexing technology which allows for multiple functions using the same button. Please take a moment to get acquainted with the following functions below: NOTES: 1. Non-highlighted icons = Press & release button 2.
  • Page 4: Programming A New Remote

    Stops the engine. PROGRAMMING A NEW REMOTE Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system? Please take note of the following: 1. A functional iDatastart system must already be installed in your vehicle.
  • Page 5: Adjusting Engine Runtime Settings

    TR1110A Your iDatastart system may enable remote engine start by performing one of the following button sequences on your factory key fob: BUTTON FUNCTION Start engine Press on Stop engine Press on BUTTON FUNCTION Start engine Press on Stop engine Press on NOTE: This feature may not be supported on some vehicles.
  • Page 6: Remote Start Troubleshooting

    Valet Mode OFF REMOTE START TROUBLESHOOTING If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then flash a number of times according to the errors below: 2022-01-27 © Automotive Data Solutions Inc. 6/11...
  • Page 7: Vehicle Shutdown Troubleshooting

    If the remote start sequence has been completed and the vehicle shuts down, the vehicle’s parking lights will flash 4 times immediately, then flash a number of times according to the errors below: 2022-01-27 © Automotive Data Solutions Inc. 7/11...
  • Page 8: Limited Lifetime Warranty

    Module overheat protection Contact Authorized Dealer LIMITED LIFETIME WARRANTY Automotive Data Solutions Inc. (“ADS”) warrants to the original purchaser of the iDatastart product that the following components product shall be free of defects in material and workmanship under normal use and circumstances: Control module and installation harnesses For as long as the original purchaser owns the vehicle in which it was originally installed.
  • Page 9: Fcc Statement

    Purchasers sole contractual remedy is refund of the purchase price of the ADS product(s).
  • Page 10: Sar Information Statement

    The FCC has granted an Equipment Authorization for this model REMOTE CAR STARTER (TWO WAY) with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model REMOTE CAR 2022-01-27 © Automotive Data Solutions Inc. 10/11...
  • Page 11 This device complies with FCC and ISED 10-g extremity SAR requirements when the device is used at 0 mm separation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2022-01-27 © Automotive Data Solutions Inc. 11/11...

This manual is also suitable for:

Tr1110a

Table of Contents