MSI H57M-ED65 Series Manual page 67

command. Allows sense amplfiers to restore data to cells.
▶ CH1/ CH2 tWTR
Mnmum tme nterval between the end of wrte data burst and the start of a col-
umn-read command. It allows I/O gatng to overdrve sense amplfiers before read
command starts.
▶ CH1/ CH2 tRRD
Specfies the actve-to-actve delay of dfferent banks.
▶ CH1/ CH2 tRTP
Tme nterval between a read and a precharge command.
▶ CH1/ CH2 tFAW
Ths tem s used to set the tFAW tmng.
▶ Current CH1/ CH2 tdrRdTRd/ tddRdTRd/ tsrRdTWr/ tdrRdTWr/ tddRdTWr/
tsrWrTRd/ tddWrTWr/ tsrRDTRd/ tsrWrTWr
These tem show the advanced DRAM tmngs.
▶ Channel 1/ Channel2 Advanced Memory Settng
Settng to [Auto] enables the advance memory tmng automatcally to be determned
by BIOS. Settng to [Manual] allows you to set the followng advanced memory tm-
ngs.
▶ Memory Rato
Ths tem allows you to set the memory multpler.
▶ Adjusted DRAM Frequency (MHz)
It shows the adjusted DRAM frequency. Read-only.
▶ QPI Rato
Ths tem allows you to set the QPI multpler.
▶ Adjusted QPI Frequency (MHz)
It shows the adjusted QPI frequency. Read-only.
▶ ClockGen Tuner
Press <Enter> to enter the sub-menu and the followng screen appears.
▶ CPU Ampltude Control/ PCI Express Ampltude Control
These tems are used to select the CPU/ PCI Express clock ampltude.
▶ Adjust PCI-E Frequency (MHz)
Ths field allows you to select the PCIE frequency (n MHz).
▶ VDroop Control
Ths s used to prevent a large number voltage dropng when system n hgh loadng
status.
MS-7587 MS-7587
3-23