MSI H57M-ED65 Series Manual page 129

4. In the "Hard Dsk Dsk Lst" menu, use <Space> key to select the dsks you want to
create for the RAID set, then clck <Enter> key to finsh selecton.
5. Then select the block value (strpe value) for the RAID array by usng the "upper
arrow" or "down arrow" keys to scroll through the avalable values, and pressng the
<Enter> key to select and advance to the next field. The avalable values range from
4KB to 128 KB. The default and typcal value for RAID 0 s 128KB. (Ths field only
avalable for RAID 0 mode.)
MS-7587 MS-7587
C-5