Standard Cmos Features - Acer Veriton 5200 Service Manual

Standard CMOS Features

Select "Standard CMOS Features" from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
The following table describes the parameters found in this menu.
Parameter
Date
Time
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
25
Description
Lets you set the date following the weekday-month-day-
year format
Lets you set the time following the hour-minute-second
format
Lets you configure the hard disk drive connected to the
master port of IDE channel 1.
To enter the IDE Primary Master setup, press Enter.
The IDE CD-ROM is always automatically detected.
Lets you configure the hard disk drive connected to the
slave port of IDE channel 1.
To enter the IDE Primary Slave setup, press Enter.
The IDE CD-ROM is always automatically detected.
Lets you configure the hard disk drive connected to the
master port of IDE channel 2.
To enter the IDE Secondary Master setup, press Enter.
The IDE CD-ROM is always automatically detected.
Lets you configure the hard disk drive connected to the
slave port of IDE channel 2.
To enter the IDE Secondary Slave setup, press Enter .
The IDE CD-ROM is always automatically detected.
Allows you to configure your floppy drive A.
Options
Weekday: Sun, Mon....Sat
Month: Jan, Feb...Dec
Day: 1 to 31
Year: 1980 to 2079
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Device Model Number
None
IDE Device Model Number
None
IDE Device Model Number
None
IDE Device Model Number
None
1.44 MB, 3.5-inch
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
2.88 MB, 3.5-inch
Chapter 2