Starting The Programme; Childproof Lock; Adding/Removing Laundry - Bosch WGA254U0AU Instruction Manual And Installation Instructions

Operating the appliance
en
Be careful when opening the
■
detergent drawer while the appliance
is running.
Measuring aid A* for liquid detergent
*depending on the model
Position the measuring aid A for
measuring the correct amount of liquid
detergent:
Pull out the detergent drawer. Insert
1.
the liquid detergent container into
dispenser II for main wash.
Pour liquid detergent into liquid
2.
detergent container and do not
exceed the Maximum mark.
Close the detergent drawer.
3.
Do not use the viscous liquid
Note:
detergent.

Starting the programme

Touch and hold Start/Reload A button
for 1~2 seconds, then release the
button. The programme starts and the
appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
34

Childproof lock

You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the p Easy Iron and ñ Finished
in buttons for 3 seconds. The symbol E
lights up in the display panel.
E lights up: The childproof lock is
■
activated.
E flashes: If the programme and
■
programme settings are adjusted
while childproof lock is activated.
When the programme ends, End
Note:
is displayed. The door is unlocked. E
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the p Easy Iron and
ñ Finished in buttons until the symbol
E disappears.

Adding/removing laundry

After starting the programme, you can
add or remove laundry if necessary.
Touch the Start/Reload A button. The
appliance checks whether reloading is
possible.
If the following appears on the display
panel:
The symbol Õ disappears,
■
reloading is possible.
The symbol Õ lights up, reloading is
■
not possible.
To continue the programme, touch the
Start/Reload A button. The
programme continues automatically.