Intermatic ET8415 Installation And Setup Instructions page 4

5. Take one of these actions.
If you select...
US2007 or MX1986,
Custom,
Press + or - to select a starting month for customized DST and press ENTER/NEXT.
6.
7. Press + or - to select a starting week (1st, 2nd, 3rd, 4th, or LST) and press ENTER/NEXT.
NOTE: DST begins at 2:00 A.M. on Sunday of the user-configured starting and ending weeks. Select LST for the fifth a Sunday of a month.
Press + or - to select an ending month and press ENTER/NEXT.
8.
9. Press + or - to select and ending week and press ENTER/NEXT.
10. Press MODE to save the DST rule and exit.
Setting Astro Zone and Time Zone Mode
The Astro Zone command enables users to set the geographical location (country, state or province, and quadrant). of the time switch.
Follow this procedure to set the Astro Zone for the time switch.
1. Press MODE to scroll until ASTRO ZONE appears at top of the screen. The screen displays AL and C and a flashing USA.
2. Press + or - to select the country (USA, Canada, or Mexico) and press ENTER/NEXT.
3. Take one of these actions.
If you selected...
USA or Canada,
Mexico,
4. Press + or - to select to the applicable quadrant and press ENTER/NEXT. The LAT (latitude) screen appears.
NOTE: Each state, province, and country are divided into geographical quadrants. Choose the quadrant that is most ap-
plicable to your location. The number of quadrants vary by state, province, and country.
5. Determine if the latitude for your location needs to be set.
NOTE: In most cases, the quadrant provides an accurate location for your time switch. Certain states require a latitude and longi-
tude to be set in the time switch. If this is a requirement, follow the applicable steps to set a latitude and longitude.
6. Take one of these actions.
If...
Latitude needs to be set,
Latitude does not need to be set,
NOTE: If necessary, press + or - simultaneously to return to the region screen.
7. Press + or - to select the longitude and press ENTER/NEXT. The TZCENT screen appears.
8. Press + or - to scroll to select the required time zone and press ENTER/NEXT. See table for a description of the time zones.
Time Zone Options
TZ HAI
TZ ALS
TZPACI
TZMntN
TZCENT
TZEAST
TZATLN
TZNFLD
9. Press MODE to save the settings.
Then...
Go to step 10.
Press ENTER/NEXT. The screen displays a flashing MAR and 2ND.
Go to step 6.
Description
Hawaiian time zone
Alaskan time zone
Pacific time zone
Mountain time zone
Central time zone
Eastern time zone
Atlantic time zone
Newfoundland time zone
Then...
Press + or - to select the desired state or province and press ENTER/
NEXT. Go to step 4.
Go to step 4.
Then...
Press + or - to select the latitude and press ENTER/NEXT.
The longitude screen appears. Go to step 7.
Press ENTER/NEXT to scroll past the latitude and longitude
screens to the TZCENT screen. Go to step 8.