Removing The Blades; Replacing The Blades - Oster 76998-320 Instruction Manual

5. Always take care not to tangle the cord while using or storing the trimmer.
6. We recommend storing the trimmer and cord in the original carton when
not in use.
Changing Blades
This unit is designed with interchangeable blade attachments. It is not necessary
to replace the actual blades.

REMOVING THE BLADES

1. Turn the unit off. Unplug the unit from the accessory cord if in use.
2. Push the upper part of the blade away from the unit. The blade and blade
attachment will "snap" off.

REPLACING THE BLADES

1. Turn the unit off. Unplug the unit from the accessory cord if in use.
2. Align the blade attachment and the trimmer by inserting the small tab on the
bottom of the blade attachment into the cut out receptacle on the bottom of
the trimmer.
3. Push the upper part of the blade towards the unit. The blade attachment will snap
securely into the trimmer. Do not force the blade attachment. If properly aligned,
the blade will snap into the trimmer with little force. Forcing the blade attachment
will cause damage to your trimmer and will void the warranty.
Comb Attachments
Your unit comes with two (one 5mm and one 10mm) comb attachments. These
are provided to increase the functionality and enjoyment of your unit. The 5mm
attachment will leave hair approximately 3/16" long, while the 10mm attachment
will leave hair approximately 3/8" long.
INSERTING THE COMB ATTACHMENT
1. Insert the cutting edge of the blade into the comb attachment.
2. Snap it tight at the back end of the blade by pushing down on the Guide Comb
Attachment tab.
REMOVING THE COMB ATTACHMENT
1. Push up on the Guide Comb Attachment tab until it releases from the metal
blade.
2. Continue lifting the Comb Attachment away from the cutting edge of the blade
until the Comb Attachment is free.