User Maintenance Instructions - Oster 76998-320 Instruction Manual

Corded Operation
The trimmer has been designed to use the auxiliary
power cord if the battery is low and the unit will not
turn on as a result or if you want to use the trimmer
as corded.
1. If the battery is low and the unit has stopped
working or you notice that the power has
decreased, then you may still operate the unit
by plugging in one end of the auxiliary cord
into the unit and the other end into the
charging stand.
2. Turn the trimmer on using the "On-Off" switch
and use the trimmer. If the trimmer does not
turn on, then the battery may be fully depleted
and may have to be partially charged prior to
re-use. Follow the charging procedure and let the battery charge for
approximately 10 minutes.
3. Turn the unit off when finished using.
4. Cover the blades with the provided blade guard to protect the blades.
5. Insert trimmer into charging stand or plug into the auxiliary power cord.
(See section titled "Charging the Unit".)
Recharging Precautions
Do not let trimmer recharge continuously for more than 3 full days.
1.
Overcharging can shorten battery life.
. Do not recharge or store trimmer when room temperature is under 0°C
2
(32°F) or over 40°C (104°F), or in a damp, humid place. This can also
shorten battery life.
. Do not recharge or store trimmer near radiators or other heat sources, or
3
where it is exposed to strong sunlight.
. Always unplug the power supply when recharging is complete.
4
User-Maintenance Instructions
1. The appliance has no user serviceable parts.
2. The product is for commercial use.
3. Keep cord straight while trimming. If cord becomes kinked or tangled, stop
trimming and straighten it.
4. Do not wrap cord around the trimmer when storing. This can damage the cord
insulation.
AUXILLARY
CORD