[Disp.] Button (Switching The Displayed Information) - Panasonic Lumix DC-GF10 Operating Instructions For Advanced Features

2. Getting Started/Basic Operations

[DISP.] button (Switching the displayed information)

Press [DISP.] to switch the information displayed on the
screen.
• If the information on the screen is not displayed any longer
because no operation was performed for some time, press the
[DISP.] button or touch the screen to display the information
again.
In Recording Mode
With information
4:3
AFS AFS
50p L
0
98 98 98
About the tilt sensor display
∫
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.

A Horizontal direction:
B Vertical direction:
• When the tilt of the camera is little, the indicator changes to green.
• Even after correcting the tilt, there may still be an error of approximately n1°.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function
Without
information
Correcting tilt to the left
Correcting downward tilt
44
With information
(tilt sensor
display)
4:3
AFS AFS
50p L
0
98 98 98
(P38) may not work correctly.
Without
information (tilt
sensor display)
