Table of Contents
Advertisement
Troubleshooting guide
Symptom
Washer doesn't start
Washer will not spin
Door does not open
Wash cycle time delayed
Fabric softener overflow
Softeners dispensed too early
Possible Cause
• Electrical power cord may not
be plugged in or connection
may be loose.
• House fuse blown, circuit
breaker tripped,or a power
o u t a g e h a s o cc u r re d .
• Water supply tap is not turned on.
• Check that the door is firmly shut. Close the door and press the Start/
• Too much softener may cause
an overflow.
Solution
Make sure plug fits tightly in wall outlet.
Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem
is a circuit overload, have it corrected
by a qualified electrician.
Turn on water supply tap.
Pause button. After pressing the
Start/Pause button, it may take a few
moments before the washer begins
to spin. The door must be locked
before spin can be achieved. Add 1
or 2 similar items to help balance the
load. Rearrange load to allow proper
spinning.
Once machine has started, the
door cannot be opened for safety
reasons. Check if the "Door Lock"
icon is illuminated. You can safely
open the door after the "Door Lock"
icon turns off.
The washing time may vary by the
amount of laundry, water pressure,
water temperature and other usage
conditions. If an imbalance is detected
or if the suds removing programme is
on, the wash time shall be increased.
Follow softener guidelines to ensure
appropriate amount is used.
Do not exceed the maximum fill line
Close the dispenser drawer slowly.
Do not open the drawer during the
wash cycle.
33
Advertisement
Table of Contents
