4. Gently rotate R1 & R2 knob from the left to the right several times.
(R1 knob will move "+" left to the right and R2 knob will move
"+' up and down)
5. Click "Next" till you see "Axis Calibration for Z Axis".
(S1 slider is recognized as Z Axis)
6. Move S1 slider up and down.
7. Click "Next" till you see "Axis Calibration for X Rotation".
(S2 slider is recognized as X Rotation)
8. Move S2 slider up and down.
.
www.vrinsight.com
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092
E-mail :
tech@vrinsight.com
Web site :
www.vrinsight.com
3
Need help?
Do you have a question about the MS Panel and is the answer not in the manual?