Advertisement
INSTALLATION
1. Connect the USB cable of MS panel to your computer.
2. MS panel is recognized as a new Human-Interface Device (New Hardware)
3. Check all four parts are illuminated.
(Button part: A, toggle switch part: B, Slider part: C and Coolie hat part: D)
NOTE :
The blue LED light will be dim in a bright environment
CALIBRATION
NOTE :
NOTE :
Since MS panel is recognized as a joystick, it must be calibrated before use.
Since MS panel is recognized as a joystick, it must be calibrated before use.
Calibration part is explained based on Windows VISTA.
1. Go to "Control panel" => "Game Controllers" and
check MS panel is recognized as an USB pad.
2. Click "Properties" => "Setting" => "Calibration".
www.vrinsight.com
A
B
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092
E-mail :
3. Run "Calibration Wizard" and click "Next" till you
see "Axis calibration".
tech@vrinsight.com
Web site :
D
C
www.vrinsight.com
2
Advertisement
Need help?
Do you have a question about the MS Panel and is the answer not in the manual?