Vivotek TB9330-E User Manual page 146

VIVOTEK
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
6. Set Server Parameter Values
Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
PARAMETER DESCRIPTION
<parameter> A full path like: "videoin_c0_s0_h264_resolution", "videoin_c0_s0_h264_maxframe", etc.
<value> The assigned <value> to the <parameter>.
<return page> Redirect to the page <return page>after the <parameter> is assigned. The <return page>can
be a full URL path or relative path according to the current path. If you omit this parameter, it will
redirect to an empty page.
(Note: The return page can be a general HTML file (.htm, .html). It cannot be a CGI command or
have any extra parameters. This parameter must be placed at the end of the parameter list.
Return:
HTTP/1.0 200 OK\r\n
146 - User's Manual