Acer TravelMate 8210 Service Manual page 87

Hide thumbs Also See for TravelMate 8210:
Table of Contents

Advertisement

Error Message
I/O device IRQ conflict
Operating system not found
No beep, power-on indicator
turns off and LCD is blank.
No beep, power-on indicator
turns on and LCD is blank.
No beep, power-on indicator
turns on and LCD is blank. But
you can see POST on an
external CRT.
No beep, power-on indicator
turns on and a blinking cursor
shown on LCD during POST.
No beep during POST but
system runs correctly.
Chapter 4
FRU/Action in Sequence
Run "Load Default Settings" in BIOS Setup Utility.
RTC battery
System board
Enter Setup and see if fixed disk and drive A: are
properly identified.
Diskette drive
Hard disk drive
System board
Power source (battery pack and power adapter). See
"Power System Check".
Ensure every connector is connected correctly.
Reconnect the DIMM.
LED board
System board
Power source (battery pack and power adapter). See
"Power System Check".
Reconnect the LCD connector.
Hard disk drive
LCD inverter ID
LCD cable
LCD Inverter
LCD
System board
Reconnect the LCD connectors.
LCD inverter ID
LCD cable
LCD inverter
LCD
System board
Ensure every connector is connected tightly and
correctly.
System board
Speaker
System board
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

8210 6632 - travelmate - core 2 duo ghzTravelmate 8200

Table of Contents