Default Speaker; Transfer Contacts - JETHRO SC490 Manual

Default Speaker

1. Press the MENU button.
2. Use the right and left arrow buttons to scroll to Settings and press
the OK button.
3. Use the down arrow button to scroll to Sound and press the OK
button.
4. Scroll to Default Speaker and press the OK button to toggle it to
on.
Speed Dial
YouTube Tutorial Here
1. Create your contacts first (see page 6).
2. Press and hold any number 2 through 9 until you see the pop-
up message "This key is not set as speed dial, set it now?" and
press the OK button.
3. Select any empty speed dial slot by pressing the OK button.
4. Choose the contact you would like in this speed dial slot by
scrolling through the contacts and pressing the OK button on
your preferred contact.

Transfer Contacts

From One Jethro Phone to Another
1. Press the SPKR button to bring up the contacts.
2. Press the MENU button to bring up your options.
3. Use the down arrow button to scroll to Settings and press
the OK button.
4. Use the down arrow button to scroll to IMPORT and press
the OK button.
5. Make sure PHONE CONTACT is selected and choose NEXT.
6. Make sure USIM is selected and press NEXT.
7. Select the contacts you want to copy and select OK.
Remove the SIM card and insert it into the new phone.
1. From the new phone, press SPKR to go to Contacts,
2. Select the MENU for Options.
3. Scroll to Settings and press OK.
18