Settings & Other; Apn Settings; Bluetooth - How To Connect A New Device; Change Ringtone - JETHRO SC490 Manual

Settings & Other
YouTube Tutorial Here

APN Settings

1. Press the MENU button and use the right and left arrow buttons
to scroll to Settings then press the OK button.
2. Select Network & Internet by pressing the OK button.
3. Scroll down to Mobile Network and press the OK button.
4. Use the down arrow button to scroll to Access Point Names and
press the OK button.
5. Press the MENU button to bring up Options.
6. Select New APN by pressing the OK button when it is highlighted
blue.
7. Manually enter the APN information for your specific provider,
press the MENU button, and select Save by pressing the OK
button. *Please note every service provider has different APN
settings, so make sure you enter the APN settings of your service
provider.
Bluetooth – How to connect a new device
1. Press the MENU button
2. Use the right and left arrow buttons to scroll to Settings and press
the OK button.
3. Use the down arrow button to highlight option 2, Connected
devices, and press the OK button.
4. Press the OK button when Bluetooth is highlight blue to turn it
on.
5. Press the OK button again to toggle Bluetooth to on.
6. Use the down arrow button to navigate to Pair new device and
press the OK button.
7. Use the arrow buttons to navigate to the device you want to pair
and press the OK button.

Change Ringtone

1. Press the MENU button.
14