Table of Contents
Advertisement
Faults and what to do about them
en
Faults
Drying time too long?
Displayed drying time
changes during drying
process.
Humidity in the room
increases.
Power cut.
* depending on the model
If you cannot rectify the fault yourself by turning the dryer off and on, please
Note:
contact our after-sales service.
30
Cause/remedy
The fluff filter may be dirty and cause a longer drying time. Clean the fluff fil-
■
ter.
The heat exchanger may be dirty and cause a longer drying time. Clean the
■
heat exchanger.
If the air inlet on the dryer is blocked or not freely accessible, this may
■
increase the drying time. Make sure that the air inlet remains unobstructed.
If the ambient temperature is higher than 35 °C, this may extend the drying
■
time.
Insufficient air circulation in the room may increase the drying time. Venti-
■
late the room.
Not a fault. The dryer recognizes the load and adapts the remaining program
duration.
Not a fault. Make sure the room is sufficiently ventilated.
The drying program is interrupted. Remove the laundry and spread it out, or
restart the program.
Advertisement
Table of Contents
