Table of Contents
Advertisement
Cleaning
en
First insert the heat exchanger, and
9.
then fit the heat exchanger's top cap
in place.
Turn both locking levers back and
10.
close the maintenance flap until it
locks into place.
Close the maintenance flap and
11.
press on it until you feel it click in
place.
28
Cleaning the moisture sensor
The dryer is equipped with a
Note:
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of usage the moisture
sensor may become covered by a fine
layer of limescale or residues of
detergents and care products. Such
residues must be removed regularly as
the sensor function and in consequence
the drying result may be impaired.
Open the door and clean the moisture
sensor with a coarse sponge.
Caution!
Moisture sensor may be damaged.
Do not clean moisture sensors with
abrasives and steel wool.
Advertisement
Table of Contents
