LG WT23WT6HA Owner's Manual page 68

global_main.book.book Page 24 Thursday, January 7, 2021 2:52 PM
OPERATION
24
Using Basic Options
Delay(Lavado Demorado)
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER/AUTO OFF(ENCENDIDO/
APAGADO) button.
2
Select a washing programme.
3
Press the Delay(Lavado Demorado) button
to set the required delay ending time.
4
Press the START/PAUSE(INICIO/PAUSA) button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press Delay(Lavado
Demorado) button repeatedly until the
reservation is cancelled or press the POWER/
AUTO OFF(ENCENDIDO/APAGADO) button to
turn off and on power.
Cold Wash
Use this option to save energy by using cooler
water while increasing the wash and rinse times to
maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• Selecting this option increases the water
supplied during rinsing. The water supplied
during washing is not increased.
• For best wash results, only wash small loads (less
than 3.7 kg) with this option.
Setting
Child Lock(Bloqueo de panel)
Use Child Lock(Bloqueo de panel) function to
disable the controls. This function can prevent
children from changing programmes or
operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER/AUTO OFF(ENCENDIDO/
APAGADO) button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Signal(Señal)
button simultaneously for 3 seconds to
activate this function.
Unlocking the Cont rol Panel
1
Turn on the power.
2
Press and hold the Signal(Señal)
button simultaneously for 3 seconds to
deactivate this function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
Signal(Señal)
The washing machine plays a melody when the
washing programme is finished. The buttons make
a sound each time they are pressed.
• Press the Signal(Señal) button to turn the
sounds on or off.
• When no signal is heard, the signal is off. The
Signal can be turned on at any time as long as
the washing machine is turned on.
and the
CL