NORPOLE R-NPPAC6KWM User Manual

Refubished portable air conditioner 6000/8000/10000 btu

Advertisement

Refubished Portable
Air Conditioner
6000/8000/10000 BTU
User's Manual
Model R-NPPAC6KWM / R-NPPAC8KWM / R-NPPAC10KWM
READ THIS MANUAL CAREFULLY BEFORE USING YOUR PORTABLE AIR
CONDITIONER AND KEEP IT FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R-NPPAC6KWM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NORPOLE R-NPPAC6KWM

  • Page 1 Refubished Portable Air Conditioner 6000/8000/10000 BTU User’s Manual Model R-NPPAC6KWM / R-NPPAC8KWM / R-NPPAC10KWM READ THIS MANUAL CAREFULLY BEFORE USING YOUR PORTABLE AIR CONDITIONER AND KEEP IT FOR FUTURE REFERENCE.
  • Page 2: Product Registration

    PRODUCT REGISTRATION Thank you for purchasing a refurbished Norpole™ product. The first step to protect your product is to complete the product registration on our website: www.arcaugusta.com/register-my-product.htm. The benefits of registering your product include the following: Registering your product will allow for more efficient warranty service processing when warranty service is required.
  • Page 3: Table Of Contents

    CONTENTS PRODUCT REGISTRATION ........2 IMPORTANT SAFETY INSTRUCTIONS .
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS NOTE This user manual encompasses information for the NPPAC6KWM, the NPPAC8KWM and the NPPAC10KWM. Make note of the unit you own while reading operation instructions as there may be some discrepancies. ExPLANATION OF SYMBOLS WARNING: Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION: Hazards or unsafe practices which COULD result in minor personal injury or property damage.
  • Page 5 19. Contact customer service or an authorized service technician for repair or maintenance of this unit. DO NOT try to take apart or repair the unit by yourself. 20. Turn off and unplug the unit if strange sounds, smells, or smoke come from it. 21.
  • Page 6: Specifications

    SPECIFICATIONS Figure 1 Model NPPAC6KWM NPPAC8KWM NPPAC10KWM Dimensions (W x H x D) 13.0” x 24.2” x 12.5” 13.0” x 24.2” x 12.5” 14” x 27.7” x 13.6” Weight 41.4 lbs. 44.1 lbs. 52.9 lbs. 6000 8000 10000 SACC BTU 3000 3800 5500...
  • Page 7: Parts Identification

    PARTS IDENTIFICATION Figure 2 ON/OFF SHORT MODE TIMER TEMP TIMER SLEEP FOR NPPAC6KWM FOR NPPAC8KWM & NPPAC10KWM Front Rear Control Panel Panel Drain Outlet Remote Signal Receptor Caster Air Outlet Horizontal Louver Control Lever Handle (Both sides) Lower Air Intake (Fixed or manually adjusted) Air Filter (Behind the grille) Bottom Tray Drain Outlet...
  • Page 8: Installation Instructions

    INSTALLATION INSTRUCTIONS TOOLS NEEDED • Medium Philips screwdriver • Tape measure or ruler • Knife or scissors • Saw (optional, to shorten window adaptor for narrow windows) ACCESSORIES smaller windows. Part Description Quantity Unit Adaptor 1 pc 1 pc Exhaust Hose Window Slider Adaptor 1 pc Bolt...
  • Page 9 LOCATION Figure 3 Your installation location should meet the following requirements: • Make sure that you install your unit on a level surface to minimize noise and vibration. • The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit) must be accessible.
  • Page 10 Type 1: Hung Window Installation Foam seal B (Adhesive type-shorter) Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame Foam seal A as shown. (Adhesive type) Window Slider B (if required) Insert the window slider Window Slider A...
  • Page 11 Insert the window slider adaptor into the hole of the window slider. Type 2: Sliding Window Installation Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown. Insert the window slider assembly into the window opening.
  • Page 12 If desired, install the security bracket with 2 screws as shown. Insert the window slider adaptor into the hole of the window slider. To ensure proper function, DO NOT overextend or bend the hose. Make sure that the air outlet NOTE: of the exhaust hose has a clearance of about 20 in.
  • Page 13: Remote Control (For Nppac6Kwm)

    REMOTE CONTROL (FOR NPPAC6KWM) Before you begin using your new air conditioner, make sure to familiarize yourself with the remote control. The following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the OPERATING INSTRUCTIONS section of this manual.
  • Page 14 Temperature/Timer Display: Displays the set temperature by default, or timer setting when using TIMER ON/OFF functions. • Temperature range: 62°F-86°F (17°-30°C) • Timer setting range: 0-24 hours This display is blank when operating in FAN mode. Fan Speed Display: Shows set fan speed of HIGH “>>>>>>>>>>”, MEDIUM “>>>>>>>”, or LOW “>>>”. Not all models have medium speed.
  • Page 15: Remote Control (For Nppac8Kwm & Nppac10Kwm)

    REMOTE CONTROL (FOR NPPAC8KWM & NPPAC10KWM) Before you begin using your new air conditioner, make sure to familiarize yourself with the remote control. The following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the OPERATING INSTRUCTIONS section of this manual.
  • Page 16 Temperature Display – Shows temp setting. Off when unit is in FAN Mode. Lock Display – Lit when the remote control is locked. Fan Speed Display – Shows set fan speed of AUTO, low, medium, or high. Not all models have medium speed.
  • Page 17: Operation Instructions

    OPERATING INSTRUCTIONS CONTROLS Figure 12 Mode Button: Selects the operating mode. Each time you press the button, a mode will change from COOL> FAN>DRY. The mode indicator light indicates what mode is set. NOTE: The unit operates the fan speed automatically. You can only set the fan speed with the remote controller in COOL and FAN modes.
  • Page 18 Dry Mode • Press the “MODE” button on the unit or the remote until the “DRY” indicator lights. • The temperature and fan speed cannot be adjusted in this mode. The fan will operate at Low speed. • Keep windows and doors closed and do not run the exhaust duct to window. Auto Mode (Remote Control Only) •...
  • Page 19 Press TEMP/TIME adjust button to set time. Push “UP” or “DOWN” to change the time forward or backward. Each time you press the button, the time moves forward or backward by one minute. Hold the button to change the time in 10 minutes increments. When the correct time is set, push and release the CLOCK button, or wait for 5 seconds until the time stops flashing.
  • Page 20: Care And Maintenance

    CARE AND MAINTENANCE WARNING: Turn the unit off and remove the plug from the wall outlet before maintenance or cleaning. WARNING: DO NOT use flammable liquids or chemicals to clean the unit. • DO NOT immerse in or spray with water to clean. •...
  • Page 21: Troubleshooting

    TROUBLESHOOTING Please check the following before calling for service. Problem Possible Cause Troubleshooting The Water Collection Tray is full. P1 Error Code Turn off and unplug the unit, drain the water from Unit does not turn on the Water Collection Tray and restart the unit. when pressing ON/OFF button.

This manual is also suitable for:

R-nppac8kwmR-nppac10kwm

Table of Contents