Listen Technologies ListenTALK LA480 Quick Start Manual

ListenTALK Docking Station
Tray/Case Quick Start Guide

Introduction

Thank you for purchasing the ListenTALK Docking Station! For additional details on use, adjustment,
or programming, download the full ListenTALK Operations Manual from
manuals. To purchase additional accessories, visit: www.listentech.com/shop-listen.
Docking Station Tray – Place on a flat surface or
mount on a wall or other surface using the Wall-
Mounting Slots on the back. Connect the Power
Supply to the Docking Station Power Connector
and the Power Cord to any standard AC outlet
(100/240 VAC, 50/60 Hz).

Charge ListenTALK Units

Insert ListenTALK units into Docking Station pockets.
The Status LEDs on each individual ListenTALK will begin
flashing indicating the battery is charging. When fully
charged the Status LEDs will be lit solid.

Create a Group with Docking Station

Create a Leader by inserting a red Leader Clip into a
ListenTALK unit. Place the Leader unit into the
Leader Pocket.
Pairing Button – Create a ListenTALK Group by
momentarily pressing the Docking Station paring
Button. This pairs the Leader unit (in the red Leader
Pocket) to all other ListenTALK units in the Docking Station.
The pair indicator will flash, then turn solid, and extinguish
when the pairing process is completed successfully.
Create multiple, independent ListenTALK Groups by
repeating this process.
www.listentech.com/support/
Docking Station Case – Place on a flat surface.
Connect the Power Supply to the Power Connector
and the Power Cord to any standard AC outlet
(100/240 VAC, 50/60 Hz).
Note: Each ListenTALK Group is independent and
communication is secured by a unique encryption key.
Cancel Pairing – To cancel paring and create a new Group,
place the ListenTALK Leader into the red Leader Pocket
and ListenTALK Participants into the Participant Pockets.
Then, press and hold the Paring Button for 5 seconds.
The pair and status indicator will flash, then turn solid,
and extinguish when the paring process is completed
successfully. This cancels previous ListenTALK paring
and creates a new Group with a new encryption key.
www.listentech.com