Listen Technologies ListenTALK LA-480 Quick Start Manual

ListenTALK Docking Station
Quick Start Guide
Introduction
Thank you for purchasing the ListenTALK Docking Station! For additional details on use, adjustment,
or programming, download the full ListenTALK Operations Manual from
manuals. To purchase accessories, visit: www.listentech.com/shop-listen.
Docking
Station 16
LA-480
Position and Connect the Docking Station
Docking Station 16 – Place on a flat surface or mount
on a wall or other surface using the Wall-Mounting Slots
on the back.
Docking Station Case – Place on a flat surface.
Connect – Connect the Power Supply to the Docking Station
Power Connector and the Power Cord to any standard
AC outlet (110/220 VAC, 50/60 Hz). Optionally, connect
the Docking Station's USB Port to a Windows computer
equipped with the ListenTALK Software Suite.
Charge ListenTALK Transceivers
Insert ListenTALK Transceivers into Docking Station
pockets. The Transceiver Status Indicator will flash
indicating the battery is charging and turn solid when
fully charged.
www.listentech.com/support/
Create a Group with Docking Station
Create a Leader and optional Sub-Leader(s) by inserting
red Leader Clips onto Transceivers. Place the Leader into
the Leader Pocket. Place other Transceivers into
Participant pockets.
Pairing Button – Create a ListenTALK Group by momentarily
pressing the Docking Station Pairing Button.
The Pairing Indicator will flash during
pairing, then turn solid momentarily and
finally extinguish when the pairing process
is completed successfully. Create multiple, independent
ListenTALK Groups by repeating this process with
additional units.
Note: Each ListenTALK Group is independent and
communication is secured by a unique Pair Key.
Note: To prevent heat build up keep lid
open when connected to power!
Docking
Station Case 16
LA-481
www.listentech.com