Ricoh FD5000 Manual page 161

Motors
M FM6 Pawl Motor
M Stopper 3 Motor
M 2nd Fold Motor
M Crease Motor
Sensors
S Top Tray Exit Sensor
S Entrance Sensor
S Entrance JG HP Sensor
S Horizontal Path Paper Sensor
S Top Tray Paper Path Sensor
S Top Tray Full Sensor (E)
S Top Tray Full Sensor (R)
S Horizontal Path Exit Sensor
S Vertical Path Paper Sensor
Drives the double-flap pawl that prevents bending of
the leading edge when the 3rd fold is executed for
FM6 folding (Fourths with 2 Flaps In)
Moves Stopper 3 to the correct position for folding
according to the paper size.
Drives 3rd fold roller. Reverses when the paper does
not pass through the 3rd fold unit.
Drives the crease rollers.
Checks for the presence of paper at power on.
Detects paper jams at the exit of the top tray. Used
to create timing for control of paper fed to the top
tray.
Checks for the presence of paper at power on.
Detects paper jams of paper fed from the upstream
unit. Used to create timing for operation of the shift
roller during multiple-sheet folding.
Detects when the entrance junction gate is in and
out of its home position.
Checks for the presence of paper at power on.
Checks for the presence of paper at power on.
Also checks for jams during paper feed.
Detects when the top tray is full.
Detects when the top tray is full.
Checks for the presence of paper at power on.
Checks for paper jams when paper exits to the
downstream unit. Used to create timing for paper
exit to the downstream unit.
Checks for the presence of paper at power on.
Electrical Components
2
159