Table of Contents
Advertisement
F. Wall Mounting (Optional)
NOTE: For use only with a UL Listed Wall Mount Bracket.
To obtain a wall-mounting kit or height adjustment base, contact
ViewSonic
or your local dealer. Refer to the instructions that come
®
with the base mounting kit. To convert your display from a desk-
mounted to a wall-mounted display, do the following:
1. Find VESA compatible wall-mounting kit which meets the
quaternions below,
Max
Loading
14kg
100mm x 100mm
2. Verify that the power button is turned Off, then disconnect the
power cord.
3. Lay the display face down on a towel or blanket.
4. Remove the base. (Screws removal might be required.)
5. Attach the mounting bracket from the wall mounting kit using
screws of the appropriate length.
6. Attach the display to the wall, following the instructions in the
wall-mounting kit.
Hole pattern
Interface Pad
(W x H; mm)
Pad
(W x H x D)
Hole
115 mm x
115 mm x
Ø 5mm
2.6 mm
12
Screw Q'ty &
Specification
4 piece
M4 x 10mm
Advertisement
Table of Contents
