LG CineBeam PF610P Owner's Manual page 132

Sound Problems
First of all, perform a
[Sound Test] to check for any abnormalities in the projector.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your projector.
The screen is fine, but it does not play any sound.
• If you use a set-top box, there will be no sound if you have set the volume of
the set-top box or your projector to 0 or enabled Mute. Set the volume to an
appropriate level.
• (Q. Settings)
Set the [Sound Out] to [Internal Projector Speaker], and then check it once
again. If you can hear the sound just fine, you need to set the external speakers
connected such as a soundbar.
There is no sound coming from one of the speakers.
• (Q. Settings)
Adjust the balance as necessary with the Navigation button in [Balance].
(Q. Settings)
[Sound] [Sound Out]
[Sound] [Sound Mode Settings]
[Support] [Additional Settings]
87
[Balance]