General Information; Before You Begin - Acer TravelMate 3040 Service Manual

Hide thumbs Also See for TravelMate 3040:
Table of Contents

Advertisement

General Information

Before You Begin

Before proceeding with the disassembly procedure, make sure that you do the following:
1.
Turn off the power to the system and all peripherals.
2.
Unplug the AC adapter and all power and signal cables from the system.
3.
Remove the battery pack.
NOTE: TravelMate 3000 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may
need to tear the tape or mylar before you disconnect different FFC/FPC/connectors.
NOTE: There are several types of screws used to secure bottom case and upper case assembly. The screws
vary in length. Please refer the picture below, group the same type of screws together during service
disassembling. Please also remember the screw location for each screw type. If you fasten the screw to
the wrong location, the screw may be too long to damage the main board.
62
Chapter 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travelmate 3030

Table of Contents