Programme Settings - Bosch WTW85540EU Installation And Operating Instructions Manual

Table of Contents

Advertisement

Programme settings

en
0
Programme settings
P r o g r a m m e s e t t i n g s
Buttons
Not all buttons and their functions can be selected in all programmes.
Note:
steam Adjust î
Easy-Iron
60 min Q
Easy-Iron
120 min Q
Low Heat s
end signal C
ü Drying
target Ê:
cupboard extra plus
cupboard dry
iron dry
Fine adjust ó
24
Displays
Explanations and information
Select the amount of steam for the steam programmes to Æ
Æ
(normal), Æ Æ (high) or Æ Æ Æ (very high).
Æ Æ
Æ Æ Æ
The drum moves the laundry at regular intervals after drying to
prevent creasing. You can extend the automatic Anti-Crease
function by 60 minutes (by pressing Easy-Iron 60
min Q 60 min) or 120 minutes (by pressing Easy-Iron 120
min Q) after any programme has finished.
Reduced temperature for delicate fabrics, e.g. polyacrylic or
elastane; may increase the drying time.
Use the end signal C button to activate or deactivate the audi-
ble signal that sounds to indicate that the programme has
ended. If the setting has been selected, the button's indicator
light will be lit and the signal tone is activated.
Select the dryness level depending on the required degree of
dryness.
If you have selected a dryness level, this will be stored for the
selected programme even after the appliance has been
switched off. Exception: The settings will not be saved for Cot-
tons.
Multi-layered, thick laundry that does not dry readily.
Ò
Normal, single-layered laundry.
»
Normal, single-layered laundry that still needs to be damp after
ö
drying and is suitable for ironing or hanging up.
If you think the laundry is still too damp when the drying pro-
5
gramme has ended, you can adjust the degree of dryness to
5 5
achieve a particular dryness level. To increase the dryness level,
5 5 5
set the degree of dryness to between 5 and 5 5 5. This will
extend the programme duration but the temperature will remain
the same.
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.

Advertisement

Table of Contents
loading

Table of Contents