Gemtech SHIELD Operation And Maintenance page 7

SOUND SUPPRESSOR SHIELD
Gemtech shall have no liability for incidental or consequential
damages and under no circumstances will Gemtech be liable for
personal injury, property damage or economic loss.
This warranty and disclaimer is subject to all applicable laws some of
which may limit these terms.
WARRANTY REPAIRS: Return of a Damaged Suppressor
If a suppressor is damaged due to a manufacturing defect once it has
been fired, it may be returned to Gemtech for repair or replacement. Determi-
nation to repair or replace is made solely at our discretion and only after we
have had the opportunity to examine and determine that the cause of the
damage is due to a manufacturing defect. It is the responsibility of the cus-
tomer to cover shipping costs and insurance to return the suppressor to
Gemtech for inspection or repair. Gemtech will pay any reasonable shipping
and insurance costs to return the unit to you.
To assure proper legal procedures for any repair returns, fill out and pro-
vide a copy of the General Service Form with any packages sent to us.
(Visit gem-tech.com, navigate to Customer Support/Return and Repair Poli-
cies to download the fillable General Service Form.pdf or call 208.939.7222)
BATFE no longer requires transfer on a Form 5 to the manufacturer for
repair. BATFE does require a letter accompanying the suppressor detailing
the repairs or modifications required (satisfied by a completely filled out Gen-
eral Service Form). BATFE also requires proof of ownership satisfied by a
photocopy of the front of the owner's Form 3, 4, or 5.
NOTE: BATFE prohibits transferring the serial number to a new outer
tube in the case of damage to the tube. Tube damage rendering the suppres-
sor unsafe will require a new suppressor.
P. 6