Gemtech GMT-300 BLACKOUT Quick Start Manual

GMT-300 BLACKOUT
GEMTECH ALL RIGHTS RESERVED. For more information visit www.gem-tech.com for accessories, adapters, and ammunition. Manufactured by: GEMTECH, PO Box 140618, Boise, ID 83714. Phone: (208) 939-7222. Sales@gemtech.com
®
WARRANTY AND DISCLAIMER:
READ AND FOLLOW ALL PRODUCT INSTRUCTIONS
AND WARNINGS.
LIMITED WARRANTY: Gemini Technologies, Inc., DBA
Gemtech, warrants to the initial retail purchaser that
Gemtech products will be free of defects in workmanship
or material and that the product meets manufacturing
specifications at the time of manufacture. This warranty
is limited to the repair or replacement of the product.
This express limited warranty is exclusive and no other
express or implied warranty is otherwise provided.
GEMTECH MAKES NO WARRANTY OF MERCHANTABILITY
OR FITNESS FOR PARTICULAR PURPOSE.
Product technical specifications and/or designs may be
changed without notice. This warranty does not cover
negligence, misuse, careless or improper handling
and/or operation, abuse, unauthorized adjustments or
modifications, improper mounting/installation, ordinary
wear and tear, the failure to follow manufacturer
instructions and/or the use of inappropriate or
defective ammunition.
GEMTECH SHALL HAVE NO LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES AND
UNDER NO CIRCUMSTANCES WILL GEMTECH BE
LIABLE FOR PERSONAL INJURY, PROPERTY DAMAGE
OR ECONOMIC LOSS.
This warranty and disclaimer is subject to all applicable
laws some of which may limit these terms.
©2014 GEMTECH ® . GEMTECH and G-CORE are registered trademarks of Gemini Technologies, Inc. All rights reserved.
WARRANTY REPAIRS:
RETURN OF DAMAGED
SUPPRESSORS:
If a suppressor is damaged due to a manufacturing
defect once it has been fired, it may be returned to
Gemtech for repair or replacement. Determination to
repair or replace is made solely at our discretion and
only after we have had the opportunity to examine and
determine that the cause of damage is due to
manufacturer defect. It is the responsibility of the
customer to cover shipping costs and insurance to
return the suppressor to Gemtech for inspection or
repair. Gemtech will pay any reasonable shipping and
insurance costs to return the unit to you. To ensure
proper legal procedures for any repair returns, fill out
and provide a copy of the General Service Form with
any packages sent to us. (Visit: gem-tech.com,
navigate to CUSTOMER SUPPORT/RETURN & REPAIR
POLICIES to down load the General Service Form.pdf
or call 208.939.7222).
BATFE no longer requires transfer on a Form 5 to the
manufacturer for repair. BATFE does require a letter
accompanying the suppressor detailing the repairs or
modifications required. BATFE requires proof of
ownership satisfied by a photocopy of the front of the
owner's form 3,4, or 5.
NOTE: BATFE prohibits transferring the serial number to
a new outer tube in the case of damage to the tube.
Tube damage rendering the suppressor unsafe to use
will require a new suppressor.
BEFORE USING THIS SUPPRESSOR:
BE CERTAIN YOU HAVE READ AND UNDERSTAND THIS MANUAL. FAILURE TO
FOLLOW INSTRUCTIONS IN THIS MANUAL CAN RESULT IN THE POTENTIAL
FOR SERIOUS INJURY AND PROPERTY DAMAGE. USE EXTREME CARE AND
CAUTION WHEN HANDLING ANY FIREARM AND SUPPRESSOR.
AMMUNITION:
We encourage the use of Gemtech 300 BLK ammunition.
(Visit: gem-tech.com for more information)
ONLY USE .300 BLACKOUT AMMUNITION
MEETING SAAMI SPECIFICATIONS WITH THIS
GEMTECH SUPPRESSOR.
SAFETY WARNINGS:
Make sure suppressor is TIGHT to the shoulder of the barrel for
proper alignment. Silencers are potentially dangerous. Safe and
proper use is the responsibility of the product user. Gemtech is
not responsible for improper use of this product.
SPECIFICATIONS:
• SOUND REDUCTION: 36-39 dB
• CALIBER: 300 BLACKOUT
SUPERSONIC AND SUBSONIC ONLY
• FULL AUTO RATED*
• LENGTH: 6.7"
• DIAMETER: 1.5"
• WEIGHT: 14 OZ
• MATERIAL: TITANIUM
• TUBE FINISH: DESERT TAN CERAKOTE
WITH REDUCED VISUAL-IR SIGNATURE
• CORE FINISH: TITANIUM
• MOUNT: 5 / -24 THREAD
8
*Fully automatic fire is defined as 4-8 round bursts, every 3 to 6 seconds.
INSTALLATION AND REMOVAL:
WARNING! DO NOT INSTALL OR REMOVE THE
GMT-300 BLK WHILE THE FIREARM IS LOADED.
First remove the magazine from the firearm. Second, visually and
manually check and clear the chamber and action. Make certain
the firearm is unloaded at all times.
INSTALLATION: Remove any thread protector or muzzle device.
Thread the suppressor clockwise onto the muzzle.
HAND TIGHTEN ONLY. DO NOT OVER TIGHTEN.
REMOVAL: Unscrew the suppressor by hand. If necessary use a
/ inch socket wrench inserted into the muzzle to loosen.
3
8
CAUTION! DO NOT REMOVE THE GMT-300 BLK
WHILE THE SUPPRESSOR IS HOT.