Limited Warranty Statement - Gemtech SHIELD Operation And Maintenance

Table of Contents

Advertisement

SOUND SUPPRESSOR SHIELD
The SHIELD suppressor is constructed of 100% corrosion resistant ti-
tanium and inconel. As such, there is no concern about corrosion from the
products of combustion of the propellant gases. We have found no need
for cleaning the inside of the suppressor. We strongly advise against
such efforts or immersion in solvents. Solvents will not drain completely
and residual liquid may cause unexpected pressure peaks which can dam-
age the unit. The high flame temperature burns out the majority of any re-
maining powder residues.
All mounting/alignment surfaces should be inspected and remain clean.
They may be cleaned with a brass brush or ¾ inch copper pipe brush dipped
in CLP.
Unlike firearms, it is neither necessary nor desirable to clean centerfire
rifle suppressors. It is acceptable to blow out particulate matter with high
pressure compressed air. Do not, under any circumstances, attempt to pass
a cleaning patch through the suppressor.
Although more states are permitting hunting with suppressors, it is sug-
gested that the local state Fish & Game Department be consulted for the
most recent changes in the law.
Gemini Technologies, Inc., dba Gemtech, warrants to the initial retail
purchaser that Gemtech products will be free of defects in workmanship or
material and that the product meets manufacturing specifications at the
time of manufacture. This warranty is limited to the repair or replacement of
the product. This express limited warranty is exclusive and no other express
or implied warranty is otherwise provided.
GEMTECH MAKES NO WARRANTY OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE.
Product technical specifications and/or designs may be changed
without notice. This warranty does not cover negligence, misuse, careless
or improper handling and/or operation, abuse, unauthorized adjustments or
modifications, improper mounting/installation, ordinary wear and tear, the
failure to follow manufacturer instructions and/or the use of inappropriate or
defective ammunition.
HUNTING NOTICE

LIMITED WARRANTY STATEMENT

CLEANING
P. 5

Advertisement

Table of Contents
loading

Table of Contents