Table of Contents
Advertisement
SOUND SUPPRESSOR MODEL MK-9K
REASSEMBLY
Reassembly is the reverse of disassembly. When reassembling the
suppressor, we suggest use of a thread lubricant and anti-seize compound,
such as a Teflon compound or one of the many quality commercial anti-seize
materials.
The holes in the wall of central core are in the rear section. After coating
the threads with anti-sieze compound, screw the rear mount hand tight into
the rear of the central core.
Be certain that the Viton "O" ring in the rear mount is intact, and replace
if worn or broken. Replacements are available at most well stocked hardware
stores or stores selling hydraulic tools and are 1-3/4" x 1/16".
Coat the inside of the end of the outer tube with either a lithium based
grease or Vaseline in order to facilitate disassembly and reduce binding of
the "O" ring. Replace the outer tube and screw in the front end cap to secure
all parts in place. This completes the reassembly.
NOTES ON USE
Use of this suppressor on a centerfire rifle will exceed the design pa-
rameters, leading to structural failure of the suppressor and possible injury to
the user.
Because of the design of this suppressor, heating of the outer tube
during fully automatic fire is minimized. If firing the weapon causes the outer
tube to heat to the point of being too hot to touch, then the suppressor should
be allowed to cool until it can be handled without discomfort before resuming
fire. Because of this indication of overheating, we suggest against the use of
a protective Nomex cover.
PHYSICAL SPECIFICATIONS
LIMITED WARRANTY STATEMENT
Gemini Technologies, Inc., dba Gemtech, warrants to the initial retail
purchaser that Gemtech products will be free of defects in workmanship or
material and that the product meets manufacturing specifications at the
time of manufacture. This warranty is limited to the repair or replacement of
the product. This express limited warranty is exclusive and no other express
or implied warranty is otherwise provided.
GEMTECH MAKES NO WARRANTY OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE.
Product technical specifications and/or designs may be changed
without notice. This warranty does not cover negligence, misuse, careless
or improper handling and/or operation, abuse, unauthorized adjustments or
Caliber
9mm Parabellum (only)
Length
7.5 inch (191 mm)
Diameter
2 inch (51 mm)
Weight
20 ounce (570 gm)
P. 10
Advertisement
Table of Contents
