Bunnlink; Energy Saver; Scheduler - Bunn Fast Cup 55400.0103 Programming Manual

BUNNlink

®
If BUNNlink hardware has been installed in the
machine, this screen will indicate that it is active,
and provide other data. There is no editable
information on this screen.
NOTE
: BUNNlink has to be Enabled at Setup
after it is installed.

Energy Saver

1. Touching the check box will add the green arrow
and enable the Energy Saver feature. If the
check box is enabled, the machine will operate
in an energy saver mode. After two hours of
inactivity, the screen saver video will be stopped,
and the backlight will dim. After four hours of
inactivity, the brew tank temperature setting will
drop to 140°F.
2. Touching the main screen at any time will exit
the Energy Saver feature. If any changes to the
screen have been made, press Save to confirm.

Scheduler

1. When Scheduler is enabled, the on/off,
times/days of the week can be set to allow
vending (brewing/dispensing). This can be
used in conjunction with Energy Saver.
2. In this example, the machine is set to allow
vending between 6:00 AM through 6:00 PM
on Monday through Friday.
3. The Password Required To Exit checkbox
means that a password (number) must be
entered to allow vending.
4. Press Save to confirm.
MACHINE SETTINGS
1
27
1
3
2
2
4
continued >