Bunn COMBO BREWER Installation & Operating Instructions Manual
Bunn COMBO BREWER Installation & Operating Instructions Manual

Bunn COMBO BREWER Installation & Operating Instructions Manual

Combination grinder & brewer
Hide thumbs Also See for COMBO BREWER:

Advertisement

Quick Links

BUNN
INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION
This equipment will grind a preselected amount of whole bean coffee into the brew funnel and automatically
brew a half-gallon batch of coffee into an awaiting decanter. All functions of the grinder and brewer are
independently adjustable. It includes a hot water faucet for allied beverage use. It is only for indoor use on a sturdy,
level counter or shelf.
The grind is preset at the factory to drip specifications as set forth by the United States Department of
Commerce and adopted by the Coffee Brewing Center of the Pan American Coffee Bureau. Adjustments may be
made to alter both the amount and grind from the factory setting.
WARRANTY
Bunn-O-Matic Corp. ("Bunn") warrants the equipment manufactured by it to be commercially free from defects
in material and workmanship existing at the time of manufacture and appearing within one year from the date of
installation. In addition:
1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and
workmanship for two years from the date of installation.
2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material
and workmanship for two years from the date of installation.
3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory
screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.
This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that,
in Bunn's judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper
maintenance or repair, damage or casualty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are
not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.
The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer
shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole
discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge
for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during
the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the
equipment or refund the purchase price for the equipment.
THE BUYER'S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS
SPECIFIED HEREIN, TO REPAIR OR, AT BUNN'S SOLE OPTION, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer's customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
POST OFFICE BOX 3227, SPRINGFIELD, ILLINOIS 62708-3227
TELEPHONE: (217) 529-6601
10858.0000 7/00 © 1995 BUNN-O-MATIC CORPORATION
®
BUNN-O-MATIC CORPORATION
COMBO
Combination Grinder & Brewer
FAX: (217) 529-6644
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COMBO BREWER and is the answer not in the manual?

Questions and answers

Summary of Contents for Bunn COMBO BREWER

  • Page 1 SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND. In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
  • Page 2 USER NOTICES The notices on this brewer should be kept in good condition. Replace unreadable or damaged labels. ELECTRICAL REQUIREMENTS CAUTION - Do not connect to the power source until specified in Initial Set-Up. This equipment requires either 2-wire, grounded service rated 120 volts ac or 3-wire, grounded service rated 120/208 or 120/240 volts ac, 20 amp, single phase, 60 Hz.
  • Page 3 " water supply line. A tight coil of copper tubing in the water line will facilitate moving the brewer to clean the counter top. Bunn-O-Matic does not recommend the use of a saddle valve to install the brewer. The size and shape of the hole made in the supply line by this type of device may restrict water flow.
  • Page 4 1. Place some whole bean coffee in each of the two hoppers. 2. Place the Hopper Select switch on the grinder in the “RIGHT” position. 3. Place the Selector switch (center) in the upper “GRIND/BREW” position. 4. Place a BUNN ® paper filter in an empty brew funnel.
  • Page 5 COFFEE GRINDING & BREWING 1. Insert a BUNN ® filter into the brew funnel. 2. Visually inspect the hopper for an adequate supply of whole bean coffee.
  • Page 6 3. Press and hold the "FUNC" button until the display is blank and then release. 4. Verify the setting by weighing a few samples. 5. Place the Selector switch in the upper “GRIND/BREW” position. 6. Place a BUNN ® paper filter in an empty brew funnel.
  • Page 7 4. Verify the setting by weighing a few samples from each hopper. 5. Place the Hopper Select switch on the grinder in the appropriate "RIGHT" or "LEFT" position. 6. Place the Selector switch in the upper “GRIND/BREW” position. 7. Place a BUNN ® paper filter in an empty brew funnel.
  • Page 8: Schematic Wiring Diagram

    WHI/BLU WHI/BLK WHI/BLK WHI/BLK SLIDE GATES SELECTOR SWITCH WHI/BLK WHI/BLK WHI/BLK WHI/RED TEMP LIMIT WHI/BLU GRINDER – RECT 120 VOLTS AC, 2 WIRE, 120/208 OR 120/240 VOLTS AC, 3 WIRE SINGLE PHASE 10850.0000B 5/96 © 1995 BUNN-O-MATIC CORPORATION 10858 071200...

This manual is also suitable for:

Combo

Table of Contents