JVC AV-32Z25EUY Service Manual page 22

AV-32Z25EUY
AV-28Z25EUY
Measuring
Item
instrument
Remote
SUB COLOURⅠ Ⅰ Ⅰ Ⅰ
control unit
adjustment
FUNCTION key
i
( INFORMATION ) key
REMOTE CONTROL KEY
22
Test point Adjustment part
7.COLOUR
(PAL～ ～ ～ ～ NTSC)
PAL COLOUR
CH. key
SECAM COLOUR
MENU
( OK ) key
NTSC COLOUR
No. 52067
Description
[Method of adjustment without measuring instrument]
(PAL COLOUR)
1. Receive PAL broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 7.COLOUR with the FUNCTION UP/DOWN ( / ) key.
4. Set the initial setting value for PAL COLOUR with the
FUNCTION -/+ ( / ) key.
5. If the colour is not the best with the initial set value, make
fine adjustment until you get the best colour.
6. Press the MENU key and memorize the set value.
(SECAM COLOUR)
1. Receive a SECAM broadcast.
2. Make fine adjustment of SECAM COLOUR in the same
manner as for above.
(NTSC 3.58 COLOUR)
1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the
EXT terminal.
2. Make similar fine adjustment of NTSC 3.58 COLOUR in the
same manner as for above.
(NTSC 4.43COLOUR)
1. When NTSC 3.58 COLOUR set, NTSC 4.43 COLOUR will
automatically set.