Re-Install Bundled Software Without Cd; Change Password - Acer Extensa 2350 User Manual

48

Re-install bundled software without CD

Acer eRecovery stores pre-loaded software internally for easy driver
and application re-installation.
1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery utility.
3 Enter the password to proceed. The default password is six 0s.
4 In the Acer eRecovery window, select "Recovery actions" and click
"Next".
5 In the Recovery settings window, select "Reinstall applications/
drivers" and click "Next".
6 Select the desired driver/application and follow the instructions on
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.

Change password

Acer eRecovery is protected by a password that can be changed by the
user. The password is used by both Acer eRecovery and Acer disc-to-
disc Recovery. Follow the steps below to change the password in Acer
eRecovery.
1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery utility.
3 Enter the password to proceed. The default password is six 0s.
4 In the Acer eRecovery window, select "Recovery settings" and click
"Next".
5 In the Recovery settings window, select "Password: Change Acer
eRecovery password" and click "Next".
6 Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, users
can run Acer Disc-to-Disc to restore the factory default image
under DOS mode.
2 Customizing my computer