Table of Contents
Advertisement
No Display Issue
If the Display doesn't work, perform the following actions one at a time to correct the problem. Do not replace
non-defective FRUs:
LCD panel/
No POST or Video
If the POST or video doesn't display, perform the following actions one at a time to correct the problem.
1.
Make sure that the internal display is selected. On this notebook model, switching between the internal
display and the external display is done by pressing Fn+F5. Reference Product pages for specific model
procedures.
2.
Make sure the computer has power by checking at least one of the following occurs:
•
Fans start up
•
Status LEDs light up
If there is no power, see "Power On Issue" on page 192.
3.
Drain any stored power by removing the power cable and battery and holding down the power button for
10 seconds. Reconnect the power and reboot the computer.
4.
Connect an external monitor to the computer and switch between the internal display and the external
display is by pressing Fn+F5 (on this model).
If the POST or video appears on the external display, see "LCD Failure" on page 195.
5.
Disconnect power and all external devices including port replicators or docking stations. Remove any
memory cards and CD/DVD discs. Restart the computer.
If the computer boots correctly, add the devices one by one until the failure point is discovered.
6.
Reseat the memory modules.
7.
Remove the drives (see "Disassembly Process" on page 50).
8.
If the Issue is still not resolved, see "Online Support Information" on page 265.
Chapter 4
LCD module
Replace
No
OK?
LCD cable
Replace
M/B
START
goto no power
Power On?
No
trouble shooting
step
Ext. DDRRAM
Connect
No
module well
it well
connected?
Replace
Ext. DDRRAM
No
Ext. DDR RAM
module OK?
module
CPU thermal
module well
No
Screw it well
screw?
193
Advertisement
Table of Contents
