Operation; Practical Tips - Electrolux ETTG1-40BK Instruction Book

OPERATION

EN
Before using for the first time remove any stickers on the appliance and clean it thoroughly (see
"Cleaning and care").
TH
Do not use any metal utensils on the grilling surface to prevent damage to the non-stick coating!
VN
Preparing the table grill
Insert drip tray (B) in base frame (A). Inserting the heater plate (D) in the base frame (A).
Apply a little cooking oil to the sur face of the heater plate each time before use with the aid of
kitchen paper for better non-stick proper ties.
Insert the thermostat with mains cable (C) fully in the socket on the appliance. The thermostat can
only be fitted when the heater plate (D) is in the correct location in the base (A).
Working with the table grill
Connect the mains cable (C) to the socket.
Turn the thermostat (C) to the desired setting (1 to 5).
1 = lowest temperature
5 = highest temperature
The operating lamp on the thermostat is on while the grill is heating up. When the temperature is
reached, heating takes place at intervals to maintain the temperature constant.
To switch off the appliance, turn the thermostat to "OFF".
Do not remove the heater plate from the frame during use. Use
the frame to carry or move the unit after cooling for at least 30 minutes.

PRACTICAL TIPS

The grill plate (D3) are ideal for the preparation of meat, fish and poultry. Fat and juice can fall
into the drip tray through the grill webs. This ensures a healthy, low-fat preparation.
The griddle plate (D2) is ideal for example for the preparation of eggs, ham, mushrooms,
tomatoes, onions, etc. It is also very well suited for keeping food warm.
Frozen food should always be thawed before it is grilled.
To grill meat, put the thermostat in its maximum position and preheat the grill plate. For other
ingredients, choose the temperature accordingly.
If you grill vegetables, fish or lean meat, spray the grill plate with a cooking spray. If you are
grilling meat with any amount of fat, or if the food has been marinated, there is no need to treat
the grill plate prior to cooking.
Cleaning and care
Remove the mains plug from the socket.
Allow the appliance to cool down. Disassemble the appliance. The heater plate can only be removed
from the base frame after the thermostat has been removed.
The heater plate can be cleaned in the dishwasher or manually.
Thermostat, drip tray and base frame should be cleaned with a damp cloth (not safe for dishwasher).
Dry all parts thoroughly before reassembling the appliance
Note that water must not penetrate inside the thermostat under any circumstances!
Never clean under running water or even in rinsing water.
STORAGE
It is best to store the table grill assembled.
4 www.electrolux.com