Samsung SWA-W700 User Manual page 7

• This product uses some software programs which are distributed under the FreeRTOS Modified GPL.
GPL Software : FreeRTOS
FreeRTOS Modified GPL License
http://www.freertos.org/license.txt
Important Note About Service
• An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
• You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-W700 to a Soundbar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
Bottom of the Wireless Subwoofer
• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or
connecting the power cord on the bottom.
• The upper part of the subwoofer is prone to scratches. Handle it carefully.
Rear of the Wireless Subwoofer
POWER
POWER
• Do not press on or strike the Speaker Unit on the
Speaker Unit
ENG - 7
Front of the Wireless Subwoofer
rear of the body. You can deform or damage the
speaker.
Blue blinking