JVC UX-GN9V Instructions Manual page 25

3
Press 7 to stop playback.
• The menu screen appears on the TV
screen.
When a file recorded on the connected USB
device is selected as the source, "USB" is dis-
played.
Numbers of the current group and total groups
recorded on the loaded disc or connected USB
device
Numbers of the current track (file)
and total tracks (files) included in the
current group
Elapsed playback time of the
current track (MP3, WMA,
WAV or ASF file only)
Number of the total tracks
(files) recorded on the loaded
disc or connected USB device
Current track (file)
Tag information (MP3 or WMA file only)
Current group
Playback status
For the locations of the remote
control buttons, refer to page 20.
4
Press , ,  or  to select a
group and track.
NOTE
• You can also use the number buttons and 4
or ¢ to select a track.
• For some discs/files, you can also select a group
by pressing [GROUP/TITLE SKIP] while holding
down [SHIFT] or use the number buttons.
• Because you do not refer to the TV screen, espe-
cially when a USB device connected to the [USB2
AUDIO REC/PLAY] terminal is selected as the
source, 4, ¢ and [GROUP/TITLE SKIP] are
useful.
5
Press [DVD/CD 6], [USB1 6]
or [USB2 6].
NOTE
• To disconnect a USB device safely, turn off the
main unit before disconnecting the USB device.
Slide-show playback
• JPEG files are continuously played back begin-
ning with the selected file.
• Display time for a file in slide-show playback is
approximately 3 seconds.
• You can stop slide-show playback and view the
current file by pressing [DVD/CD 6] or [USB1
6] again.
• Press [ENTER/SET] to view only the selected
file.
Guide icons on the TV screen
(on-screen guide)
: Play
: Pause
: Fast reverse/fast forward search
: Slow motion playback (reverse/
forward directions)
: Containing multi-audio languages
(Refer to page 30.)
: Containing multi-subtitle languages
(Refer to page 30.)
: Containing multi-view angles (Refer to
page 30.)
: The disc/file cannot accept the opera-
tion you have attempted.
22