Page 1
Easy-Locks and cable connectors) so that they can easily be replaced Never use the in-lite low-voltage cable directly connected to 100-230V. This cable is only meant for use with the components of the in-lite 12 Volt (low- voltage) system. www.in-lite.com...
Page 2
Wi-Fi. Three power lines A total of 150 VA in fixtures can be connected to the SMART HUB-150. Three power cables can easily be connected to the transformer using the Easy-Connect click connectors. With one transformer you’re able to create three lighting zones in your outdoor space.
Page 3
The software protection is based on one true-RMS current measurement and two voltage measurements. If the external load is increased, the following levels are reached for SMART HUB-150: Detection levels calibrated for each product at 100% of nominal load (150 •...
(app), the system is ready for connection. All lights can be controlled with the in-lite app on a smart phone or tablet. The app, which is suitable for an Android and iOS device, can be downloaded from the app store and installed on your device.
INSTALLATION MANUAL SMART HUB-150 Installation step by step Although the transformer is designed to withstand inclement weather, you are recommended not to place it close to a sprayer system. Place the transformer at least 50 cm above the ground and in the immediate vicinity of a 110V/230V electric socket.
Page 9
Step 1 Open the app store on your Android or iOS device (smart phone or tablet). Search for in-lite and download the app. Step 2 Open the app on your device. You have two options to select; you’re a new user or you already have an account.
Page 10
INSTALLATION MANUAL SMART HUB-150 When you’ve created an account before you can log in with the code you’ve got by email. (Fig. 17) It’s also possible to skip the set-up when it has already been done by someone else and you’ve got a share code. You use that code to log in. (Fig. 18) Step 4 After logging in or creating your account you can connect accessories;...
Page 22
FIG. 6 Use with smart device All lights can be controlled with the in-lite application (app) on a smart phone or tablet. The app, which is suitable for an Android and iOS device, can be downloaded from the app store and installed on your device.
INSTALLATION MANUAL SMART HUB-150 Troubleshooting tips The lighting does not switch on with any of the programs. Check that the transformer is correctly connected. If so, check the voltage at the electric socket (you can do this using a voltage tester). Check that the low-voltage cable is correctly wired to the transformer.
Installing fixtures on 12 V You can easily connect in-lite fixtures to the low-voltage cable using the Easy- Lock connector (supplied with each fixture). Important: always check the manual for specific instructions for the relevant fixture.