Removing The Power Board - Acer Aspire 5534 Series Service Manual

Removing the Power Board

1. See "Removing the Upper Cover" on page 62.
2. Remove the single screw securing the Power Board to the Lower Cover.
Step
Power Board
3. Pull the FFC up to remove it from the adhesive securing it to the Speaker Module.
4. Tilt the board 90 degrees to clear the securing tab.
IMPORTANT:The FFC is soldered to the power board. Take care when lifting to minimize bending of the
connection, lest breakage occur.
70
Size
M2.5*3
Quantity
1
Screw Type
Chapter 3