Removing the Power Button Board
1. Perform the
page 3-18.
2. Release the connector latch from the power button board (1), then disconnect the power
button cable (2).
3. Turn the upper case over.
4. Remove the screw securing the power button board to the upper case.
Table 3-25. Screw
Power Button Board Disassembly
Machine Maintenance
Downloaded from
www.Manualslib.com
"Removing the Palmrest Module/Upper
Figure 3-24. Power Button Cable
Figure 3-25. Power Button Board Screw
Step
manuals search engine
Case" procedure described on
Screw
M2 × L3
Quantity
Screw Type
1
0
3-23