Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:
• HDMI® (best)
• AV (good)
• Coaxial (good)
®
HDMI
(best)
On your TV
HDMI® cable
connector
HDMI® jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI® cable (not provided) to an HDMI jack on your TV and to the HDMI OUT jack on the cable or satellite
box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
Note
For better picture quality, we recommend that you use cables designated as
High Speed HDMI® cables.
or
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
32" HD LED 720p/40" Full HD LED 1080p Sharp Roku TV
What connection should I use?
Side of TV
40" TV shown
LC-32LB601U/LC-32LB601C/LC-40LB601U
on page 16.
Cable
wall jack
HDMI® cable
Cable or
satellite box
17