How To Change The Headband Pad; Version; Supplied Accessories; Accessories And Replacement Parts - Beyerdynamic DT 700 Pro X Manual

HOW TO CHANGE THE HEADBAND PAD

u
To remove the headband pad, carefully pull on the
silicon strap until all hooks of the headband pad are
released from the headband
u
To attach the headband pad, make sure that the
snap-in nose on the right side sits in the right place.
u
Then press gently the pad into the headband until
the hooks snap into place.
.

VERSION

u
DT 700 PRO X
Dynamic premium studio
headphones, closed, 48 Ω . . . . . . . . . Order # 737.704

SUPPLIED ACCESSORIES

u
1 x Straight cable, 3-pin mini XLR and
mini stereo jack (3.5 mm) &
1/4" (6.35 mm) adapter, length 3 m (9.8 ft)
u
1 x Straight cable, 3-pin mini XLR and
mini stereo jack (3.5 mm) &
1/4" (6.35 mm) adapter, length 1.8 m (5.9 ft)
u
1 x Bag

ACCESSORIES AND REPLACEMENT PARTS

u
Accessories and replacement equipment can be
found at: www.beyerdynamic.com
u
If you have technical problems while using the head-
phones or need further guidance, please visit our
FAQ website at: support.beyerdynamic.com

SERVICE

u
If you require service, please contact
qualified service personnel or directly:
beyerdynamic Service- und Logistik Center
E-mail: service@beyerdynamic.de
u
Dismantling the headphone yourself will invalidate
the guarantee.
5