Panasonic CS-25XKE Service Manual page 135

Connection network using WPS mode (method 1)
Press the WPS button on the router that
1
will be connected to the air conditioner.
• Check that the Wireless LAN LED is ON.
If the Wireless LAN LED is OFF, press
the Wireless LAN
and enable Wireless LAN connection.
Connection Guide
Step 1
Step 2
Next
Cancel
3 When the air conditioner is successfully
connected to the router, the Wireless LAN
LED stops blinking and turns ON.
Connection Guide
Step 1
Step 2
When the connec on of air-condi oner to router
is successful, the Wireless LAN LED changes from
blinking to ON.
*It may take up to few minutes before changes
to ON.
If the Wireless LAN LED is ON, tap "Next".
Next
If Wireless LAN LED keep blinking, tap "Check"
Check
Cancel
button to turn it on,
Step 3
Step 3
Check that the Wireless LAN LED is ON.
2
Press the Wireless LAN
seconds until "1" appears on the remote
control. Point the remote control to the
air conditioner and press
Connection Guide
Step 1 Step 2
Next
Cancel
4 If the Wireless LAN LED keeps blinking,
check the wireless router connection.
Connection Guide
Step 1 Step 2
Searching for air-condi oner.
Please wait...
Cancel
135
button for 5
.
SET
Step 3
SET
CANCEL
Step 3