Cleaning The Hose Filter - Beko DFN28321W User Manual

A
Maintenance and cleaning
2
1
B
3
4. Clean all three filters under tap water
by means of a brush.
A
Do not remove the micro filter
cleaning mechanism (4) for
C
cleaning (D).
4
D
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the filters
will reduce washing efficiency.
Dishwasher / User's Manual

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(depends on model)
31 / 40 EN