Using This Kettle; Boiling Water - kobi KSSK17L Instruction Manual

USING THIS KETTLE

This kettle is only suitable for boiling water . Do not
boil other liquids in this kettle .

Boiling Water

1 . Remove the kettle from the power base, and
then place the kettle on a stable, level surface
for filling .
2 . Press the lid release button, and then fill the
kettle with water to the desired level .
NOTE: Fill the kettle to at least above the
"MIN" line but to below the "MAX" line .
3 . Release the lid release button to close the lid .
4 .
Place the kettle back on the power base, and
then plug the power cord into an outlet .
5 . Press the On/Off switch to turn the kettle on .
The indicator light turns on and the water
starts heating .
The kettle will automatically turn off once it
has boiled the water .
6 . Lift the kettle from the power base, then pour
the hot water into the desired container .
NOTE:
•
You can stop the heating process while the
kettle is operating by flipping the On/Off
switch up to Off .
• This kettle has a boil-dry safety feature .
If there is no water in the kettle, the kettle
automatically turns off to prevent the power
base from overheating .
• If the kettle overheats, fill it with cold water,
and then wait two minutes before using again .
7